General
1. INTERPRET DRAWING PER ASME Y14.5-2018.
2. UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN `MILLIMETERS / INCHES`
3. UOS, DIM ARE IN `MILLIMETERS / INCHES`
Product Definition
1. THIS DRAWING SHALL BE USED WITH MODEL XXX FOR COMPLETE PRODUCT DEFINITION.
2. ALL DIMENSIONS AND TOLERANCES APPLY AFTER POST PROCESS.
3. MATERIAL: `XXX`
4. POST PROCESS: `XXX`
Quality
1. ONGOING INSPECTION REQUIRED FOR `XXX` ITEMS DENOTED WITH `XXX`.
2. MATERIAL CERTIFICATION TO BE SHIPPED WITH EACH LOT.
3. FOR FIRST ARTICLE INSPECTION ALL DIMENSIONS ON DRAWING WILL BE MEASURED.
Post Processes
1. TYPE II BLACK ANODIZE PER MIL-A-8625, CLASS 2
2. REMOVE ALL BURRS AND SHARP EDGES EQUIVALENT TO R `0.1 mm or .005 IN`.